Reset Epson L3110 Waste Ink Counter
Support for the Epson L3110 is pending verification. Download PrintFix's free diagnostic to check if your L3110 firmware version is compatible.
Not Yet Confirmed
Support for the Epson L3110 has not been fully confirmed. The free diagnostic will detect whether your specific firmware version is compatible.
SNMP config not available in upstream source — pending
Your printer is showing:
"A printer's ink pad is at the end of its service life. Please contact Epson Support."
The Epson L3110 from the L-Series may display the waste ink pad error when its internal counter reaches the preset threshold. This is a common issue across Epson inkjet printers — the printer stops working as a software precaution, even though the hardware is perfectly functional.
Support for the L3110 has not been fully verified in PrintFix. SNMP config not available in upstream source — pending. However, many models in this family share the same SNMP protocol, which means there is a reasonable chance the reset will work on your specific unit.
We recommend downloading the free PrintFix diagnostic tool to check your L3110. The scan will detect your printer’s current waste ink level and confirm whether a reset is possible for your firmware version — all at no cost.
If the diagnostic confirms compatibility, you can purchase a reset key starting at just EUR 4.99 and fix your printer in seconds. If not, you will not be charged. PrintFix always detects compatibility before purchase.
How to reset your Epson L3110
Download PrintFix for your operating system (Windows, macOS, or Linux). Only 5 MB, no bloatware.
Connect your Epson L3110 to the same WiFi network as your computer, or via USB cable.
Run the free diagnostic to check your current waste ink level.
Enter your reset key and the waste ink counter resets to 0% in seconds.
Ready to fix your Epson L3110?
Get your reset key starting at €4.99. Free diagnostic included — no payment needed to check your printer.
Similar Models
Frequently Asked Questions
Download PrintFix, connect your Epson L3110 via WiFi or USB, run the free diagnostic, then enter your reset key. The process takes about 2 minutes.
Yes. The waste ink counter is a software estimate, not a physical sensor. Resetting it is safe and legal under the EU Right to Repair Directive. We recommend checking the physical ink pads after 2-3 resets.
Your Epson L3110 has a built-in counter that estimates waste ink accumulation. When it reaches a preset limit, the printer stops and shows an error — even though the hardware is fine. PrintFix resets this counter.
Reset keys start at €4.99 for a single reset. The diagnostic is always free — you only pay if you decide to reset. Family and Pro packs are available for multiple printers.
No. Under the EU Right to Repair Directive (2024/1799), you have the right to repair your own products. Resetting a software counter does not void your warranty.
Ready to fix your printer?
Get your reset key starting at €4.99
Free diagnostic included. No payment needed to check your printer.