Reset Epson ET-2720 Waste Ink Counter
Fix your Epson ET-2720 'ink pad end of service life' error. Reset the waste ink counter in minutes with PrintFix. Free diagnostic included.
Your printer is showing:
"A printer's ink pad is at the end of its service life. Please contact Epson Support."
Your Epson ET-2720 from the EcoTank series is displaying the waste ink pad error. This means the printer’s internal software counter — which estimates how much ink has been absorbed by the maintenance pads during cleaning cycles — has reached its programmed limit. The ET-2720 is not broken; this is a software lock that Epson builds into every inkjet printer.
This error affects millions of EcoTank owners worldwide. Because EcoTank printers like the ET-2720 are designed for high-volume printing with refillable ink tanks, they tend to trigger the waste ink counter faster than cartridge-based models. The good news is that the fix is simple and takes less than two minutes.
PrintFix connects to your ET-2720 over WiFi and resets the waste ink counter back to 0%. The process is entirely software-based — no disassembly, no technician visit, no sending your printer away for service. Start with the free diagnostic to see your current waste ink level, then apply the reset with a one-time key.
Under the EU Right to Repair Directive (2024/1799), you have the legal right to reset this software counter. The diagnostic is always free, and you only pay if you choose to proceed with the reset.
How to reset your Epson ET-2720
Download PrintFix for your operating system (Windows, macOS, or Linux). Only 5 MB, no bloatware.
Connect your Epson ET-2720 to the same WiFi network as your computer, or via USB cable.
Run the free diagnostic to check your current waste ink level.
Enter your reset key and the waste ink counter resets to 0% in seconds.
Ready to fix your Epson ET-2720?
Get your reset key starting at €4.99. Free diagnostic included — no payment needed to check your printer.
Similar Models
Frequently Asked Questions
Download PrintFix, connect your Epson ET-2720 via WiFi or USB, run the free diagnostic, then enter your reset key. The process takes about 2 minutes.
Yes. The waste ink counter is a software estimate, not a physical sensor. Resetting it is safe and legal under the EU Right to Repair Directive. We recommend checking the physical ink pads after 2-3 resets.
Your Epson ET-2720 has a built-in counter that estimates waste ink accumulation. When it reaches a preset limit, the printer stops and shows an error — even though the hardware is fine. PrintFix resets this counter.
Reset keys start at €4.99 for a single reset. The diagnostic is always free — you only pay if you decide to reset. Family and Pro packs are available for multiple printers.
No. Under the EU Right to Repair Directive (2024/1799), you have the right to repair your own products. Resetting a software counter does not void your warranty.
Ready to fix your printer?
Get your reset key starting at €4.99
Free diagnostic included. No payment needed to check your printer.